Divine Moving and Storage NYC NY

The Most Trusted NYC Movers and Storage Company

    • Contrast
    • Font
ADA WCAG 2.0 Section 508
Voiced by Amazon Polly

The need for storage units most commonly occurs when one lacks the necessary space for their items. It is only natural that the wish for these items to keep their impeccable state is a prominent one. One of the main issues that can get in the way of this goal is mold. And the gateway to that mold is moisture. So, when it comes to mold protections tips for storage units, even if it’s the best storage units Manhattan, one ought to know how to address moisture prevention. The following text will address that subject in greater detail, so make sure to continue with the read.

Now that we’ve distinguished the cause, we can venture into the methods of intercepting them. A rather great way to start is to check the humidity in your storage unit. And this is how it’s done:

Checking the humidity

Once you’ve found the storage unit that fits your needs, make sure to measure the humidity levels inside, and do so on a regular basis. The indoor humidity level should never exceed 50%. Now, there are two ways by which you can check this:

  1. asking a professional to get it tested
  2. install a relative humidity gauge inside your storage unit

Both can cost you a pretty penny, so make sure to get properly informed on which option would suit you best, before making the final decision.

Mold on a wall
Avoid such utter disaster by regularly checking for humidity levels in your storage unit.

After you’ve measured the humidity level, you will know how to proceed. In case the humidity level is high, you ought to have a detailed visual check of the whole unit (this includes the stored items as well) and in case you notice mold or anything other that raises suspicion, call professionals to help.

Look for leaks

One of the common storage mistakes you ought to avoid is not checking for potential leaks. Especially when you plan on using an outdoor storage unit. You need to summon your inner Sherlock Holmes (or Hercule Poirot, if you so prefer) and inspect thoroughly for cracks and holes. This is the essential, simple and highly effective way to prevent water from entering your storage. What’s more, we believe it is one of the wisest mold protection tips for storage you will receive. And remember, no crack is too small to be neglected. They will wreak havoc sooner than you realize.

Want to avoid these forming on your storage walls? Listen to our mold protection tips for storage, and check for leaks often.

In addition, even after you’ve confirmed that your newly rented/bought storage unit has no cracks, that does not mean that you shouldn’t keep checking every so often. Outdoor storage units are exposed to various weather conditions, and new cracks can be expected with great certainty.

Be smart with your choice

The best way to fight moist in your storage is to prevent moisture. And the best way to fight moisture is to stop it from developing in the first place. So, when venturing out into the wild, looking for storage to keep your items safe and sound, try not to cut back on your budget too much. Ideally, you want to find a high-quality, moisture-resistant unit, as it will save you from a lot of worries, hassles, and stress.

Storage containers are great when you intend on storing sensitive items, as they can tackle a lot of challenges. Besides, you also have the option of adding improvements, such as installing air conditioners, vents, and windows.

To sum up, apart from looking for climate controlled storage Manhattan, try to make a choice that also has moisture-control features.

Know what you are packing

Although one damp item in your storage unit might seem innocent enough, know that it can ruin all the items in the container or storage unit faster than you can say ‘mold protection tips for storage’. As a matter of fact, this is one of the common issues when it comes to packing a storage unit. Just a single slightly wet item can increase humidity levels, and leave the door wide open, complete with the neon signs that say ‘welcome’, for mold and mildew to grow on your belongings. And we wouldn’t want that. So, before you begin storing your items, make sure that they are bone dry. Be extra sure when packing swimming gear, surfboards and other items that have regular contact with water.

Two people on the beach with their surfing gear on
Swimming, surfing and diving gear is most often wet, so make sure that it’s just the opposite before you store it.

Additional and simple mold protection tips for storage

  • a vapor barrier is a great way to damp-proof your storage space. A polyethylene plastic or foil should go on the warm side of the storage wall, and thus block outdoor moisture. This flexible membrane should also be set up beneath the floor. It will prevent moisture from the ground to seep inside, and further protect your belongings. You can find the vapor barrier in most hardware stores.
  • use items that absorb moisture to protect your belongings from moisture and mold. Silica gel desiccant is a great moisture absorbent. You can purchase it, as well as other similar materials, in virtually every home hardware store, or even make your own at home. All you will need is a piece of fabric and silica gel. Make a pocket out of fabric, fill it with silica gel, and sew it closed. Leave the bags all around your storage unit.
  • if you are inclined to more natural alternatives to your mold issues, consider using charcoal. It is a nature’s way of showing it too has silica gel, only better, as besides absorbing moisture, it also does the same with unpleasant odors.
  • one of the great mold protection tips for storage, as well as protection tip overall, is to keep your items off the ground. It will keep them safe from any water that might enter, and allow for the items to ‘breathe’, if you will, with greater ease. This will help the air circulate easier, and dry out any damp spots.

About Author

John has been with Divine Moving and Storage in New York for nearly two decades. Starting as a young helper and climbing up the ranks to be a staple in our organization. John has the knowledge and experience to assist our clients with any move or storage related needs. You can reach John or any of our associates in NYC at 212-244-4011

Learn more about Moving and Storage in NYC

Need NYC Movers or Storage Call